Rig Choices That Improve Cruising Performance

A refit increasing masthead height by about 6 feet, lowering the gooseneck roughly 18 inches, and lengthening the boom by ~18 inches requires recalculating standing rig loads, headstay tension, and halyard run logistics before spar fabrication and sailmaking commence.

Design changes and why they matter

The OE 36 hull historically carried a conservative sailplan; even designer Olle Enderlein acknowledged the model had been under-rigged for family-friendly handling. Increasing sail area by raising the mast and lowering the gooseneck shifts the mainsail’s center of effort upward and aft, improving light-air performance but demanding careful placement of stays, halyard exits, and winch bases. Practical choices—like keeping a modest 17/18ths fractional rig with the forestay set about two feet down from the masthead—limit the need for running backstays while still providing a larger working sailplan.

Key dimension changes

Small details that yield big gains

What separates a successful cruising rig from a headache is often the specification list rather than headline measurements. The following items materially improve usability and longevity on a small cruising yacht:

• Halyard exit height set so a six-foot crew can comfortably heave on without excessive short-arming.
• Rope clutches at each exit, oriented and spaced so all mast lines remain led to the mast base.
• Multiple sheaves in the boom (three for reefs, one for the outhaul) and an aft-facing winch base beneath the gooseneck for reef tensioning.
• Through-bolted exterior mast tangs for standing rigging—heavier and costlier, but stronger than T-bolts.
• A low-friction, ballbearing-free Antal mast track for mainsail sliders—proven in long-distance service on vessels such as Isbjørn.
• Provision for multiple halyards and spinnaker sheaves, including topping lift/spare halyard arrangements and sheave-box exits for spinnaker, jib, pole topper, and staysail halyards.

Factory vs retrofit: timing and costs

Specifying these components at the spar factory is significantly easier and cleaner than adding them later. Items like a mast-mounted spinnaker pole track (mounted vertically so the pole stows on the mast) and fittings for an inner forestay or solent stay are marginal-cost inclusions during build but costly retrofits. Wiring runs and purpose-made fittings for navigation lights—such as OGM LED lights from Weems & Plath—should also be integrated at the mast stage to avoid later headaches and concessions in routing.

Practical rigging choices

The owner-specified list often reflects years of offshore experience: avoid single-line reefing where friction will limit control; keep reef tensioning capability at the mast if lines don't lead aft; and favor robustness over minimal weight when through-bolts can prevent catastrophic fitting failures. The owner behind this refit reported that his spar supplier called the spec “probably the best we have ever gotten from a client,” which underlines how attention to detail pays off.

Implications for charter, rentals and the cruising market

For operators and renters, a well-executed rig refit has clear benefits. A lower boom height and improved halyard geometry make sail handling easier for less experienced crews; robust tangs and factory-installed halyard exits reduce downtime and maintenance expenses; and modern mast tracks reduce wear on slides—translating into fewer support calls during a charter. That makes boats more attractive in the market, whether for private sale, yacht charter, or daily rental.

Operational considerations

• Refits exceeding the original design parameters should trigger renewed checks of chainplates, mast step, and keel/mast interface to confirm structural margins.
• More sail area means more load on running rigging, so upgrade halyards and check winch capacities.
• Consider the impact on marina berthing and mast clearance for bridges or travel lifts when increasing mast height.

GetBoat always keeps an eye on gear, maintenance trends, and news related to sailing and seaside vacations because the platform understands what it means to enjoy great leisure and love the ocean. The GetBoat service values freedom, energy, and the ability to choose your own course—placing no limits on a good life—and helps users find a vessel that suits their preferences, budget, and taste, with transparent detail like make, model, and ratings up front.

Forecasts: this sort of individual-boat refit is insignificant on the global tourism map, but meaningful at the local and fleet level. Improved rigs on small cruisers raise standards for comfort and safety in regional coastal charter markets and can influence neighboring owners to modernize. Start planning your next seaside adventure and make sure to book the best boat and yacht rentals with GetBoat before the opportunity sails away!

Highlights: the most interesting and important aspects of this topic are the balance between cost and capability when re-rigging a classic hull; the advantage of factory-fitted solutions for long-term reliability; and how modest changes—mast height, boom position, halyard geometry—transform performance and handling. Experiencing a new cruising ground is always multifaceted: you learn about culture, nature, the indescribable palette of local colors, its rhythm of life and unique service aspects. If you are planning your next trip to the sea, you should definitely consider renting a boat (boat rentals, rent a boat, rent a yacht), as each inlet, bay, and lagoon is unique and tells you about the region just as much as the local cuisine, architecture, and language GetBoat.com

In summary, a thoughtfully specified rig refit—taller mast, lower gooseneck, deliberate halyard and sheave layout, through-bolted tangs, Antal mast track, and dedicated wiring for trusted nav lights like OGM LED—delivers better light-air performance, safer reefing, and reduced long-term maintenance for cruising and charter operations. These changes affect yacht saleability, charter appeal, and the overall boating experience across marinas, beaches, lakes and coastal destinations. Whether you’re planning a bluewater voyage, a gulf hopping weekend, or a relaxed day of fishing and sun in clearwater anchorages, choices made at the rigging stage reverberate through sailing, boating, and yachting activities—helping captains, charter guests, and owners enjoy the sea, the sunseeker moments, and the many marinas on the map. No limits to a good life.