...
Blog

Rua Moana Superyacht – Luxury, Design, and Voyages Aboard

by 
Иван Иванов
13 minutes read
Blog
September 22, 2025

Rua Moana Superyacht: Luxury, Design, and Voyages Aboard

Choose Rua Moana for your next cruise to pair luxury with precise design. You will find within each level of the yacht surfaces that feel earned, from brushed oak to white marble, and the bridge that keeps operations effortless even in waters running smoothly. The источник of balance here lies in quiet spaces where footsteps on teak soften to a whisper as the crew moves through port and sea, inviting you to listen to the hull and breathe.

Design centers on living spaces that flow with outdoor decks, letting light dance on sand surfaces and exposing the sea at every turn. The main salon spans two levels with a glass-walled bulkhead that opens to an outdoor terrace, inviting guests to stroll the perimeter and feel the waters breath. The surfaces resist spray and heat, while the pair of lounges on the upper deck offers a place to watch sunsets over the horizon.

The crew delivers a well-structured cruise experience with a defined service ladder: in the mornings, chefs prepare fresh produce, and in the evenings, sommeliers guide tastings on the aft deck. You can explore coves while the ship glides, with outdoor dining on the upper deck, and listen to the water softly lap the hull. theres a quiet niche where a private conversation can unfold, ideal for a family pair or a couple exploring together, with every surface easy to wipe and maintain by hand. The design clears the mind.

For guests seeking action, make the most of powered water toys and the top deck; check the bridge operations schedule to align your run with wildlife watching times. To reduce fatigue, use the ship’s gym and sun deck as a pair of routines, and you will find that transitions between indoor and outdoor areas clear quickly when you embrace the sea’s rhythm.

Rua Moana offers an elevated experience about design, craft, and voyages aboard a floating home. The will to combine comfort with performance shines in every detail, from the engine room’s measured hum to quiet corners where guests drift into conversation. If you plan a private cruise with family or partners, set a light schedule and leave margins for spontaneous al fresco lunches on the aft deck.

Rua Moana: Yacht Profile and Voyage Insights

Reserve Rua Moana for a 7-day itinerary to maximise panoramic views from the main deck, minimise downtime, and enjoy effortless transitions between sunlit exterior spaces and shaded interiors.

The yacht is built with a streamlined hull and advanced internal systems, offering five guest cabins and a separate crew area. The bridge provides steady handling on long passages and precise mooring control when docking at a beach or two along the coast, even in hard conditions.

On a typical voyage you can expect to cover most distances at a comfortable speed, around 12–14 knots, with a plan that minimise idle time and preserves time for beach stops at sheltered coves.

The crew, led by a talented chef, deliver minute attention to every detail. Expect completely customized menus and careful fuel management that safeguard range and efficiency. The main galley runs with strict checks, while on-deck spaces provide effortless social areas for guests and crew alike. You’ll have many options to tailor routes and moorings to weather and tides.

Internal logs reference codes pachoud and lpnm, confirming a disciplined maintenance routine and safety checks across the systems.

Pachoud 26 – Rua Moana: Build Specs, Ownership, and Timeline

Secure a fixed-price contract with strict milestones before construction begins to keep the project on time and protect your wellbeing. This approach avoids the same delays seen on many builds and sets clear expectations for your team and guests.

Build specs

  • Loa: 26 m (84 ft); beam: 6.9 m; draft: 2.4 m
  • Hull: aluminium; superstructure: carbon fiber; underlayers and decks finished with natural teak
  • Displacement: approx. 260 t; propulsion: twin MTU 8V4000 series, 2 x 1360 kW units for a streamlined performance
  • Top speed: circa 22–24 knots; cruising speed: 12–15 knots; long-range cruising around 12 knots for efficiency
  • Range: about 4,000–4,500 nm at 12–14 knots; fuel capacity: ~22,000 L; water capacity: ~4,000 L
  • Accommodation: owner suite with panoramic views, four guest cabins for up to eight guests, plus crew quarters for six
  • Interior approach: custom joinery, high-end furnishings, and carpets chosen for warmth and acoustic comfort
  • Aft deck: optional pool or spa feature; sun deck with loungers and shaded seating area for your guests
  • Amenities: tender storage under aft deck, dedicated dive/gear locker, gym area, and a natural, calming color palette throughout
  • Deck layouts: open social zones, panoramic salon dining, and weather-safe transitions for all climates
  • Systems: advanced stabilization, low-emission generators, and shore-power readiness to reduce emissions on port calls

Ownership

  • Structure options favor privacy and tax planning: single-entity ownership or a dedicated management company with a separate holding. Consider a trust for succession and confidentiality
  • Flag and registry: select a reputable flag state and ensure MCA/ABS-compliant survey scope to support smooth registrations and future charters
  • Risk management: insure hull, machinery, and liability with coverage aligned to your itinerary, including high-seas operations and tender usage
  • Operational control: appoint a seasoned maritime manager to coordinate yard visits, predefined maintenance routines, and on-board guest experiences
  • Crew structure: a tight captain-to-crew ratio, with emphasis on wellbeing, safety drills, and uninterrupted service for many voyages
  • Client governance: establish a clear decision tree for approvals on design changes, port calls, and provisioning to prevent last-minute disruptions

Timeline

  1. Design finalization and contract: confirm specs, select yard, and lock milestones; secure permits and insurance
  2. Hull and structure: steel/aluminium work, basal fittings, and bottom works; begin carbon-fiber superstructure where specified
  3. Systems integration: propulsion, electrical, plumbing, HVAC, and stability systems; plan fuel and water provisioning alongside genset scheduling
  4. Interior outfitting: custom furnishings, carpets, table selections, fabrics, and mood lighting tailored to the natural palette
  5. Deck and exterior: tenders, davits, pool or spa options on the sun deck, and exterior furniture to ensure panoramic views are unobstructed
  6. Sea trials and certification: performance, safety checks, ballast, vibration, and emissions compliance; address any impact on stability and comfort
  7. Delivery and handover: owner familiarization, provisioning for the initial voyage, and crew training; establish a maintenance table for time to first service

The project plan prioritizes a streamlined handover, with your guests enjoying panoramic views from day one. Expect a completely integrated lifestyle, where natural materials and wellbeing considerations shape every cabin, salon, and deck space. The result is a lofty superyacht experience that blends comfort, performance, and design into a cohesive whole, ready to entertain many ports and encounters with minimal disruption. Throughout, keep a detailed table of milestones and a clear risk log to maintain momentum and ensure that time remains on your side. Been a priority, this plan offers a confident path from concept to coast.

Environmentally Conscious Engineering: Power, Propulsion, and Sustainability Initiatives

Recommendation: Implement a four-point hybrid propulsion system with a battery bank sized for four hours of silent cruising at eight knots, paired with a main engine for high speed transit. This configuration minimizes heat, delivers effortless operation, and reduces emissions during onshore and port legs.

  1. Hybrid propulsion approach
    • Electrically driven thrusters provide precise, low-noise station-keeping at four knots, while the main engines handle high speed transit.
    • Battery bank: 1.6–2.4 MWh total capacity, four modular strings, peak discharge around 900 kW to support rapid acceleration without overheating.
    • State-of-charge targets stay above 40% during cruising; a compact genset bridges any gap to maintain range.
  2. Energy storage and charging infrastructure
    • Modular energy storage with active cell balancing; liquid cooling keeps cells under 40 C during peak loads, preserving wellbeing aboard and extending life.
    • Onshore charging: connectors at the dock deliver shore power when in port, allowing residual heat to be removed by the hull cooling system and reducing generator runtime.
    • Fast charging option: 350 kW DC grid, enabling four hours of silent cruising to remain within local noise limits.
  3. Thermal management and heat recovery
    • Heat recovery from exhaust feeds preheat to galley water, climate control, and baths, minimise auxiliary heat load and improving efficiency by 15–25%.
    • Closed-loop cooling for batteries and electronics maintains safe under-heat conditions during multiple simultaneous loads.
  4. Operational practices for wellbeing and amenities
    • Custom routines align crew shifts with energy availability; amenities like a pop-up chef concept run from stored energy without drawing from main systems.
    • Wellbeing metrics track air quality, temperature, and noise; minute-by-minute data informs adjustments to reduce fatigue and improve crew morale.
    • There is careful planning to keep living areas comfortable under all loads, ensuring a calm environment for guests and crew alike.
  5. Custom power profiles and control logic
    • Four operating modes: idle, cruising, high speed transit, and silent port mode; a table of performance metrics guides automatic switching.
    • Smart load shedding prioritises essential services, while auxiliary pumps and amenities operate under a defined budget to minimise energy waste.
    • Software updates deliver over-the-air improvements to efficiency and reliability, using real-time data to adapt to weather and sea state.

Custom Layouts for Luxury Living: Zones and Service Flow

Design three zones on the main deck: social lounge about 60 sqm, private suites totaling 40–50 sqm, and a service core near the galley, connected by a streamlined circulation that keeps guest areas quiet while enabling swift delivery from the main kitchen. Position sightlines to the deck and water so entertaining spaces feel integrated with cruising views.

Include a pop-up dining niche on the beach-facing terrace with extended seating for 12–20 guests, a smooth floor transition from indoor to outdoor, and finishes that are environmentally responsible. Choose eco-hotel grade materials, wool upholstery where guests linger, and furnishings that resist salt and sun while maintaining a soft touch.

The floor plan stays on the same level across zones to minimize stairs, with a service corridor 1.2–1.5 m wide and modular, custom panels that adapt to different guest loads. The service core sits near the galley and bridge, with a dedicated route for linens, beverages, and cleaning supplies, ensuring there is no cross-traffic with guest spaces. This layout supports cruising with confidence on gulf routes and preserves serene views from the deck.

Materials and ambiance align with luxury without compromise: main fabrics in wool, teak deck surfaces, and glass that celebrates light. The result is a streamlined, extended zone system that delivers devotion to service with discreet presence; guests enjoy sand and sea on every side, while crew maintain high timing and attention. lpnm

Rua Moana Vessel Details: Dimensions, Materials, and Systems

Rua Moana Vessel Details: Dimensions, Materials, and Systems

Begin with a precise deck-to-keel measurement set: log LOA, LWL, beam, draft, and displacement in the following table to guide trim and stability. Within these figures, expect tight tolerances that help minimise motion and keep footsteps within cabins comfortable.

Materials balance stiffness, weight, and environmental responsibility. The hull is carbon fiber composite within a marine-grade aluminum frame, while the deck comprises teak over an epoxy core. Interiors use low-VOC finishes to support wellbeing and reduce indoor pollutants. The moanas design philosophy emphasizes clean lines and durable finishes that clear maintenance paths and preserve views from the bridge.

Systems prioritise effortless operation and clear views from the bridge. An Armstrong hydraulic steering system delivers effortless handling, and a pair of MTU diesels drive two azimuth thrusters for precise maneuvering. A fuel strategy designed to minimise burn supports long passages with minimal environmental impact. Outdoor areas connect directly to the stern and deck levels, offering uninterrupted views while guests move between spaces. Footsteps within the corridor and on the outdoor deck align with a calm, wellbeing-oriented interior. lpnm MOANAS-01 records the internal code for tracking across levels.

Parameter Value Notes
LOA (m) 52.4 Length overall
LWL (m) 48.0 Length at waterline
Beam (m) 9.9 Max hull width
Draft (m) 2.9 Keel depth
Displacement (t) 980 Approximate fully crewed weight
Hull material Carbon fiber composite Lightweight stiffness
Deck material Teak over epoxy core Outdoor durability
Superstructure material Aluminum Corrosion resistance
Propulsion 2 × MTU 12V4000 M63 diesels Redundancy
Power (kW) 2 × 1900 Total propulsive power
Fuel capacity (L) 60,000 Endurance for long passages
Range (nm @ 12 kn) 4,800 Economy cruise
Top speed (kn) 16 Maximum speed
Cruising speed (kn) 12.5 Balanced pace
Fresh water capacity (L) 75,000 Hydration and galley uses
Electrical system 400V AC, 3-phase, 50 Hz Onboard distribution
Generators 3 × 60 kW Redundant power
Stabilizers Active fins, zero-speed Stable at anchor
Outdoor deck area ~180 m² Dining and lounging spaces
Bridge Glass-forward with panoramic views Effortless monitoring
Stern facilities Swim platform, tender storage Direct water access
Crew cabins 6 Operational crew capacity
Guest cabins 6 Boutique accommodation
lpnm MOANAS-01 Internal code for tracking

Maintenance clears debris from the deck daily.

Rua Moana: A Study in Pure Elegance Across Design and Craft

Rua Moana: A Study in Pure Elegance Across Design and Craft

Choose Rua Moana for a design-led experience where every detail supports performance at sea. The yacht blends restrained luxury with precise engineering, delivering speed on long passages without compromising quiet operation. Owners who expect consistent comfort will find four guest cabins designed to feel completely separate yet visually cohesive.

Designed to please both guests and crew, the public spaces flow with soft transitions and tactile finishes. The same palette guides the cabins, where carpets absorb footsteps and reduce noise, while armstrong fixtures add subtle restraint. Attention to detail is visible in every seam.

The galley operates like a boutique kitchen, led by a skilled chef who creates menus to suit sea conditions. Equipment is arranged for efficiency, enabling quick course changes during peak service without heat fluctuations. During cruise operations, the team maintains speed and accuracy so meals land on the table as planned.

Rua Moana serves corporate charters with understated style. The four guest suites balance privacy and sociability for meetings or leisure, and the design accommodates diving excursions and ashore activities without clutter. auckland port calls are prepared with shore-side coordination aligned to an eco-hotel ethos, reflecting sustainable materials and energy management.

Owners who value long-term efficiency will appreciate the propulsion system’s optimization and the heat management that keeps cabins comfortable in heat and cool climates. Even in hard seas, the hull remains stable and predictable. The design is completely scalable for different itineraries, with the same level of attention in every module. You have options for shore access, on-water activities, and quiet corners that let guests unwind after diving or corporate meetings.

Viaduct Basin Location: Access, Shoreline, and CBD Connectivity

Use Viaduct Basin as the primary access for Rua Moana guests arriving in Auckland, because it delivers fast CBD connectivity, a sleek shoreline experience, and a smooth flow from yacht to city. The natural textures and surfaces along the promenade set a refined tone, while a direct bridge links the basin to the CBD. theres a straightforward pedestrian route that keeps guests moving with minimal friction.

Access options include a short taxi ride, a harbour tender, or about eight-minute stroll to Britomart Transport Centre. Along the quay, many dining and service venues form a pool of options, while the promenade’s soft furnishings and durable carpets create comfortable viewing points for guests and crew alike. The calm shoreline reduces wind impact, even when time is tight for transfers.

zealand imagery informs the minimalist, ocean-first design along the basin, reinforcing the sense of natural, exclusive spaces. The bridge network keeps traffic flowing with confidence, and all surfaces are finished to a sleek, easy-clean standard. Cruising boats pass at modest knots as they approach, offering a visual cue for timing and docking windows. For Rua Moana guests, this backdrop is extraordinary, elevating the furnishings and the pool of experiences ashore.

Connectivity to the CBD is robust: a dedicated pedestrian bridge links Viaduct Basin to Britomart, Queen Street, and the central business district, while electrically powered ferries offer quick city hops. Signage and lighting clear routes for guests, and attention to wayfinding minimizes confusion during peak time. A pair of docking zones offer flexible tender operations for corporate visits and private charters. theres ample time to explore, shop, and return to the yacht before departure.